Server Management - Remote Server Management
1748164 Members
3661 Online
108758 Solutions
New Discussion юеВ

Re: Capacity ILO 1st Generation

 
SOLVED
Go to solution
romain0412
Advisor

Capacity ILO 1st Generation

I've an ILO card on mly HP Prolian DL380 G4. I want to know if we can have hardware state by ssh.

I wan't to find the RAID state. There is an another solution expect HP SIM?

Thanks for your help !
2 REPLIES 2
Rajeshwari, Hiresave
Trusted Contributor
Solution

Re: Capacity ILO 1st Generation

Please clarify as to which hardware state are you looking for ? If it is the health state of devices like fans, power supplies, etc, then they are available only with iLO2. (example: show /system1/fan1) With iLO1, you can get information on the hardware configuration of the system easily, but not the health of the hardware components.

To find the raid state, either use the ACU (Array confuguration utility) or use the F8 prompt on for Smart Array controller during system boot up.


romain0412
Advisor

Re: Capacity ILO 1st Generation

You answer my question. I need hard state (RAID, CPU, FAN...).

Thanks