Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Configuring ILO on BL20p through diagnostics port

Occasional Visitor

Configuring ILO on BL20p through diagnostics port

Hello,

I have a BL20p G2 that I need to configure the ILO on locally. I have received the diagnostics cable to connect to the server, but I'm not sure exactly what to do from here.

Do I connect through the serial or network port? What are the steps to configure the IP's?

Thanks.
1 REPLY
Occasional Visitor

Re: Configuring ILO on BL20p through diagnostics port

There is an IP address on the dongle and you connect with a straight through RJ45 cable. You must configure your network to be on the same range and subnet.

Thanks.