Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Configuring iLO2 with HPONCFG xml

SOLVED
Go to Solution
Honored Contributor

Configuring iLO2 with HPONCFG xml

Hello all, and thanks in advance for any help you can offer.

I am working on an XML to use with HPONCFG that would allow me to configure all of my iLO 2 processors with rapid deployment pack.

I looked at the documentation on iLO processor scripting with regards to the SESSION_TIMEOUT setting located within the MOD_GLOBAL_SETTINGS set of instructions. The documentation lists valid values as either 15,30,60, or 120. I would prefer to disable the session timeout altogether; is there a setting or a separate command that accomplishes this for me?

-Jamie
3 REPLIES
Trusted Contributor

Re: Configuring iLO2 with HPONCFG xml

With iLO2 1.30 and later, there is a infinity timeout option.

You may download the latest 'HP Lights-Out xml Sample scripts' at http://h18000.www1.hp.com/support/files/server/us/locate/69_5561.html, and use the Mod_Global_Settings.xml. Change the Session Timeout to 0. ""
Honored Contributor

Re: Configuring iLO2 with HPONCFG xml

I thought I had the latest version of the iLO scripting document but I was wrong.

Broken link BTW, check out:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00294268/c00294268.pdf

for the newest version.


Thanks for the help!
Honored Contributor

Re: Configuring iLO2 with HPONCFG xml

The current revisions allow an indefinite timeout as detailed in the user guide.