Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 360 G3 iLO - Password

Brendan_17
Occasional Visitor

DL 360 G3 iLO - Password

I have not been able to log into the iLO managment site on any of the DL360 server. Where is the username and password located? The DL 380 G3 had tags attached.

Is there a default password that I should try?
3 REPLIES
David Claypool
Honored Contributor

Re: DL 360 G3 iLO - Password

Pop the top and find the diagram on the inside of the cover. There is an 'iLO Security Override Switch' that lets you bypass the login/password so you can set a new one.

Alternatively, create a DOS boot disk and use CPQLODOS from the SmartStart Scripting Toolkit to overwrite the current config (overwrite, not change).

Both of these methods are not considered to violate access security because they both require physical access to the box.
acartes
Honored Contributor

Re: DL 360 G3 iLO - Password

The "toe tags" contain the default Administrator credentials for iLO. One tears-off (perforation) and one remains adhered to the outside chassis. You must slide the server out of the rack a bit to see the adhered label.
Brendan_17
Occasional Visitor

Re: DL 360 G3 iLO - Password

Ok Great, we scheduled an outage and I actually pulled the servers to id the passwords on the stickers. Thanks Guys I would have never know the stickers were applied on the servers.