cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 ILO show mac

Keith E. Scott
Occasional Visitor

DL360 ILO show mac

Is there a way to get the port 1 mac address from the cli? I only see a way to get the ILO mac which is *NOT* what I need :-(

Specifically I'm looking to grab the CLI version of the WEB data (below).
Port 1 NIC MAC address: 00:xx:xx:xx:xx:xx
3 REPLIES
WFHC-WI
Honored Contributor

Re: DL360 ILO show mac

Hi Keith,

That info is not available from the iLO2 CLI.

Is the server MAC all the info you're trying to return? There are other ways to retrieve that without going through the iLO2 CLI...
Keith E. Scott
Occasional Visitor

Re: DL360 ILO show mac

yes I'm simply attempting to acquire the mac via CLI, in order to run some perl automation on the DL360/DL580 series systems.
WFHC-WI
Honored Contributor

Re: DL360 ILO show mac

You might want to check out the CONREP utility, I believe it can pull MAC info by interacting with the RBSU.

It is available from the HP SmartStart Scripting Toolkit.

good luck