Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Enable ILO without reboot & How to tell if ILO enabled?

Occasional Visitor

Enable ILO without reboot & How to tell if ILO enabled?

I have some servers that we can;t reboot and we need ILO enabled.

I've run hponcfg to program the cards and they still don't work.

I suspect that ILO may be disabled but how can I determine that?

When I look on the HP management home page, I don;t see anything that says ILO is disabled. There are a couple of items for the management processor:

Integrated Lights-Out = shows icon = green check

Embedded NEC98431 = shows icon= blue ?, status = enabled, link status = unknown

thanks
1 REPLY
Honored Contributor

Re: Enable ILO without reboot & How to tell if ILO enabled?

Is this a Windows server? If so you can check Device Manager and look at the Multifunction Adapter section for the iLO proc.

Does HPONCFG report that no ilo card was found?