Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Enable iLo2 using Scripts

Regular Advisor

Enable iLo2 using Scripts

Is it possible to enable iLo2 from scripts? We have a server that I think has the iLo2 disabled and I need to disable it. I'd prefer not to have to shut down the server and have one of the on-site contacts perform the work if possible.

If not, does the 2.0.4.1 configuration software have the ability to do this? If so, I'll have to get approval for .NET 2.0
1 REPLY
HPE Pro

Re: Enable iLo2 using Scripts

If you have The management interface driver and management agents installed on the server the HP Lights-Out Online Configuration Utility will allow you to modify the iLO settings. It does require the .NET 2.0 framework to function



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
//Add this to "OnDomLoad" event