Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

G3 DL380 Ilo

SOLVED
Go to Solution
Occasional Advisor

G3 DL380 Ilo

Hi,

First of all sorry for my bad english writing its not my first language.

I just buy 6 second hand G3 DL380 (dual 2.8) at the hardware boot, im press F8 to configure and manage ILO ...

But its asking my for a user name and a password, and i dont have these informations :-(

There is any way to reset this informations ?

Thanks for your times and answer.

Dany
4 REPLIES
Honored Contributor

Re: G3 DL380 Ilo

There is a switch to reset iLO. see below thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=227265&admit=109447626+1210228260311+28353475

This will reset iLO to default(factory) you need to give network settings again to make it available; again use F8 and do all.
Honored Contributor

Re: G3 DL380 Ilo

I think u can security override it using the information in thread:
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=668077so no need of setting things again. just password will override so after coming inside iLO you can set it again.
Occasional Advisor

Re: G3 DL380 Ilo

Hi Ajay,

Thank you for your answer ...

everything is working now with your help.
Honored Contributor

Re: G3 DL380 Ilo

Your most Welcome Dany!! I am here for help others.