Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

HP Lights-out Migration Utility problems

Occasional Contributor

HP Lights-out Migration Utility problems

Hello everybody,

Just downloaded the above mentioned tool, to make it easier for me to integrate ILO access to servers with AD group memberships. This should be a straight forward job, but I'm running in to some problems very early in the process.

The Attached screencapture shows the error message I'm getting, when trying to find one of my servers.

The server is reachable via webinterface and the login specified in the migration utility works without any problems.

Anything that I should be aware of, that could be causing this problem?
5 REPLIES
Trusted Contributor

Re: HP Lights-out Migration Utility problems

Is the user ID "administrator" or "Administrator" ?

iLO user name and password are case sensitive. So, please verify.
Occasional Contributor

Re: HP Lights-out Migration Utility problems

A vs a didn't make any difference - still received the same error.

Manually login in through the webinterface also did work using both Administrator and administrator.
Honored Contributor

Re: HP Lights-out Migration Utility problems

Looks like your don't have an iLO with IP = 10.9.228.73

Try a wildcard like 10.9.228.* to help you find the iLOs in your network.



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Honored Contributor

Re: HP Lights-out Migration Utility problems

Hi!

Is this an ILO2? then you need to change your regional settings in the Operatingsystem to English USA. For some reason it needs that for ILO2. Had the same error on an english windows 7 with swedish regional settings. ILO3 worked but ILO2 didn't.

Regards.
//Cederberg
Occasional Contributor

Re: HP Lights-out Migration Utility problems

The machines I've tried with so far are ilo3 servers. There is no problem connecting to them via the webinterface. I'm beginning to think that it would be less time consuming just to setup directory authentication in the webinterface for all the servers directly.

That I tried, and it worked nicely for the ilo3 servers, but an ilo2 server with the same configuration as the ilo3 ones don't allow me logging on to the webinterface with my directory account. Don't know if the syntax is different on ilo2, but the configuration of the directory auth. is the same on the two.