Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

Occasional Contributor

HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

My server ProLiant ML350 G5 with ILO2 and iLO 2 Advanced features Key actived, but don't work. Applay last drivers and firmware with HP System Management:
Management Processor Firmware (Active) 1.60
System ROM Firmware-D21 (Active) 2008.06.25
System ROM Firmware-D21 (Redundant) 2007.05.01
Array Controller Firmware 1.78
The Present Power show 0 Watts on Power suply.
What's worng?
5 REPLIES
Honored Contributor

Re: HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

hi

did you fix this?
bye
Didn't your momma teach you to say thanks!
Occasional Contributor

Re: HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

No, don't work.
Same servers, same Firmware, same iLOs:
ML350 G5 ILO2 (1 processor) work...
ML350 G5 ILO2 (2 processors) don't work...
:-(


Trusted Contributor

Re: HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

Did this ML350 had a Power Regulator supported processor?

http://h18004.www1.hp.com/products/servers/management/ilo/sup_servers.html
Honored Contributor

Re: HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

something came to my mind

what if you try changing Power Regulator values in ilo or BIOS (RBSU)

* HP Static Low Power Mode
* HP Static High Performance Mode
* HP Dynamic Power Savings Mode
* OS Control Mode

in case one of those is causing that behavior

bye
Didn't your momma teach you to say thanks!
Honored Contributor

Re: HP ProLiant ML350 G5 ILO2 Power Meter Readings don't work...

Another suggestion: un-plug power from the system for about 15 seconds, and then plug it back in and power-on.
//Add this to "OnDomLoad" event