Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

HP-integrated Lights Out

HP-integrated Lights Out

Hi gurus,
I want to know what is HP-integrated Lights Out. Why it is used & how can I findout whether this is present in my system

-Irfan
3 REPLIES
Honored Contributor

Re: HP-integrated Lights Out

Hi,

here you find some information about it.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=397204
With the board you have access to the machine even though it is down.

greetings,

Michael
Occasional Advisor

Re: HP-integrated Lights Out

Hi Irfan,

As for as I know, it is there in EVA Management Appliance. i.e. SMA.

As the name indicates, you can power on/off the system and reboot the system remotely.

Normally Ethernet port marked as ILO can be seen on the server I/O side.

I think, I am not very sure,
it is available on all GIII HP proliant servers

Krishna
Krishna
Honored Contributor

Re: HP-integrated Lights Out

Irfan,
This link has information about a similar question- what is iLO and how is it used:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=747272

As for how do you know if you have it... There are a few ways. I know about ProLiant servers, but cannot say about Integrity or other classes of servers.

Most ProLiant 300 and 500-series servers support it. All ProLiant P-class blade servers support it. You can find this out on the server pages for that generation server.

You can also look for the "iLO" RJ-45 port on the back of servers, or monitor the text during server POST for the iLO prompt.

There is also a supported server matrix here:
http://h18013.www1.hp.com/products/servers/management/riloe2/supported-servers.html
I think the information is correct for iLO (although it indicates RILOE II).
//Add this to "OnDomLoad" event