Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

How can I query the powersupplies via ssh to ilo2?

SOLVED
Go to solution
John Newbigin
Occasional Visitor

How can I query the powersupplies via ssh to ilo2?

I can view lots of information with
'show /system1/fan1' etc but
'show /system1/powersupply1' gives an error
status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND ERROR-UNSPECIFIED
Invalid target.


powersupply1 is listed as a target if I run 'show /system1'
3 REPLIES
David Claypool
Honored Contributor
Solution

Re: How can I query the powersupplies via ssh to ilo2?

What system are we talking about? When I try it on a DL380G5, I get:

status=0
status_tag=COMMAND COMPLETED

/system1/powersupply1
Targets
Properties
ElementName=Power Supply 1
OperationalStatus=Ok
HealthState=Ok
Verbs
cd version exit show set
John Newbigin
Occasional Visitor

Re: How can I query the powersupplies via ssh to ilo2?

My server is a DL380G5. It was running an older ilo firmware so I have updated that. Now the ssh is not working but once it comes up I will test it again.


John Newbigin
Occasional Visitor

Re: How can I query the powersupplies via ssh to ilo2?

After updating the ilo firmware, I had to restart ILO again. After that, the ssh worked and so does the 'show /system1/powersupply1' command.