Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

How to mount ILO Virtual CD-ROM under SLES 10

Occasional Contributor

How to mount ILO Virtual CD-ROM under SLES 10

Subj.
How i can mount Virtual ILO CD-ROM on server-side under SUSE 10 ?
6 REPLIES
Occasional Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

I mean SLES 10*
Honored Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

Expect the virtual media to automatically mount. You should be able to ls /media and see it mounted as cd0 or cdrom or ??

try dmesg to see if there is indication that the device was detected and mounted. You would then see it listed as a /dev
Occasional Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

May i dymmy but i`dont see any device in /media
and when i try to mount cd-rom (System says - no media) or cd0 (no special device)
dmesg.. hmm
Dmesg log in attach
Sorry - but i dont see any new device

Honored Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

What is the host server type? Do you know the firmware version of the management processor?
Occasional Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

of course )
Server DL140 G3
CPU - XEON 2 G
OS - SLES 10 x64
RAID 1 2x160 Gb
Occasional Contributor

Re: How to mount ILO Virtual CD-ROM under SLES 10

of course )
Server DL140 G3
CPU - XEON 2 G
OS - SLES 10 x64
RAID 1 2x160 Gb
All firmware - lasr versions from HP Official site
//Add this to "OnDomLoad" event