Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

ILO 4 - sometimes no response about NIC health

Collector

ILO 4 - sometimes no response about NIC health

Hi all

 

I have a big problem with two HP ProLiant 380p Gen8 servers.

We use some 3rd-party software to collect the SNMP informations trough ILO4 (ILO4 - agentless management)

If we poll the OIDs for the NICs like 1.3.6.1.4.1.232.18.2.3.1.1.14.1  over ILO4 , then we have a big amount of "no response". This happens ONLY on the NIC status. Powersupply, memory, harddrive, raid, everything other has no timeouts.

 

This issue is reproducable on all other HP ProLiant 380p Gen8 we have.

 

We have reset the ILO4 tried different firmwares (include the latest) - everytime the same "timeout" problem

 

For testing we used Paessler SNMP Tester and set the automatic polling count to 5 seconds.

 

Attached you find the log file from the tool. Search for "Value: No response (check: firewalls, routing, snmp settings of device, IPs, SNMP version, community, passwords etc) (SNMP error # -2003)"  -- this are the "no response" issues.

 

If anyone has an solution, please let us know.

Thanks!

//Add this to "OnDomLoad" event