cancel
Showing results for 
Search instead for 
Did you mean: 

ILO Access Timing

Rothfuchs, Hans-Georg
Occasional Advisor

ILO Access Timing

Hello,

 

we have certain situations of access limitations that the ILO is temporary not available.

That happens with some commands of the scripting toolkit.

We use a dedicated ILO network port.

 

Are there informations about waiting times between ILO commands?

 

Thank and regrads,

 

Hans-Georg

 

 

P.S. this thread has been moevd from Community Feedback & Suggestions to ITRC remote lights-out mgmt (iLO 2, iLO, RILOE II) Forum - HP Forums moderator

2 REPLIES
Oscar A. Perez
Honored Contributor

Re: ILO Access Timing

What iLO version is this?



__________________________________________________
If you feel this was helpful please click the KUDOS! thumb below!
Rothfuchs, Hans-Georg
Occasional Advisor

Re: ILO Access Timing

Hi,

 

we use different proliant generations like ILO2 (V2.12), ILO3 (V1.50) and ILO4 (V1.10) from SPP2012.10.0.

I think we have to distinguish between the ILO generations.

 

Has HP definite informations about it?

 

Regards,