Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

ILO Security Switch

SOLVED
Go to Solution
Occasional Contributor

ILO Security Switch

Is there any way of changing the security switch for ilo through software ?
3 REPLIES
Honored Contributor

Re: ILO Security Switch

No, it's a physical switch, not a "soft" one. If you have access to the OS and are trying to reset security on your iLO, you can use HPONCFG to change the configuration.
Occasional Contributor

Re: ILO Security Switch

Hi David
Thanks for the feedback , sorry to sound dumb but i have only just started using ilo.
How would i configre it with hponcfg ?
Honored Contributor

Re: ILO Security Switch

http://www.hp.com/go/ilo --> More iLO3 Documentation --> "HP ProLiant Integrated Lights-Out 3 v 1.05 Scripting and Command Line Guide"

Page 8:

"For Windows server operating systems, there is also the HPONCFG_GUI.EXE. This tool provides the same basic configuration capabilities as found in the iLO 3 F8 ROM-Based Setup Utility (RBSU) during the server boot up process.

Version 3.0 of this utility is required for use with iLO 3and is backwards compatible with iLO 2 and iLO."