Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

ILO2 on BL460c can't mount my crrom on VISTA Client

Occasional Contributor

ILO2 on BL460c can't mount my crrom on VISTA Client

Hi all

I use VISTA on my Client PC. If i would mount my CDROM for boot on it, i becom en Error "Cant connect Media"

On Win200 Client it works!

Thanks for Help?
2 REPLIES
Honored Contributor

Re: ILO2 on BL460c can't mount my crrom on VISTA Client

hi


check this
Advisory: Message "could not open cdrom" May Be Displayed When Attempting to Access Integrated Lights-Out (iLO) Virtual Media from a Client Running Microsoft Windows Vista


http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00868269〈=en&cc=us&taskId=101&prodSeriesId=397989&prodTypeId=18964

regards
Didn't your momma teach you to say thanks!
Honored Contributor

Re: ILO2 on BL460c can't mount my crrom on VISTA Client

From the advisory, it is an IE setting:

1. In the Internet Explorer 7 browser, click on Tools > Internet Options.
2. Click on the Security tab.
3. Remove the check mark from "Enable Protected Mode."
4. Click on Apply.
5. Exit all open browser instances and then re-start the browser.
//Add this to "OnDomLoad" event