Server Management - Remote Server Management
1748216 Members
3372 Online
108759 Solutions
New Discussion юеВ

Re: ILO3 unresponsive

 
frankd_1
New Member

Re: ILO3 unresponsive

We are seeing this on ALL G7/iLO3 systems. Our end customers are getting very annoyed. A fix can't come quick enough!! We see it randomly with 1.05, all the time with 1.10.
Brad S.
New Member

Re: ILO3 unresponsive

Can we get an update on when this new version will be released?
Paede
Advisor

Re: ILO3 unresponsive

You can use the new hponcfg.exe (3.1.0.0)
Just Install this Package (W2K8):

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=4154735&prodNameId=4154847&swEnvOID=4024&swLang=13&mode=2&taskId=135&swItem=MTX-0cf78c01fe194fb4953e43dc97

The hponcfg.exe is then under "C:\Program Files\HP\hponcfg"

works for me ;-)
Nicolai Rasmussen
Regular Advisor

Re: ILO3 unresponsive

Running ilo3 version 1.15 seem to have fixed this issue.
However, HP SMH still from time to time reports ilo as:
Interface Status: Not Responding

- Which is rather annoying, because it appears to be working just fine now!
Nicolai Rasmussen
Regular Advisor

Re: ILO3 unresponsive

ILo3 Version 1.15 is the answer.
brudan
New Member

Re: ILO3 unresponsive

Once a DL380 G7 gets into this state - has anyone found a way to restart iLO3 without power-cycling?
Dean Allendorf
Occasional Advisor

Re: ILO3 unresponsive

We are seeing this all of our DL585 G7 servers also. We applied 1.15 and works for about a week then starts to become unresponsive again. Pretty much the same symptons when we were on 1.05 then 1.10. We are running ESXi 4.1. The iLo is very important as it is the preferred method to get to the Managment Console. Need a fix asap as we have production machines running on these ESXi servers.
0644hunt
Occasional Advisor

Re: ILO3 unresponsive

This is still happening to me on our ILO3 servers which have 1.15 installed. They only work for a few hours. They do however work if you try connecting to them from the same subnet. But not from other subnets. It is very anoying.
MiCorBis
Occasional Contributor

Re: ILO3 unresponsive

Facing same issue with SMH / SIM on DL360 G7 w iLO3 on FW 1.15. SMH shows iLO3 as "not responding" but its functional. Resetting iLO3 (without power cycle) let it be "green" again - for some ours, days or weeks...

SIM receives a major warning trap: "Remote Insight/ Integrated Lights-Out Interface Error. The host OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding."
Andre Radtke
New Member

Re: ILO3 unresponsive

Hello,

we ran also in this error quite often. Now we are on FW 1.16 on a DL 360 G7 and still getting this error. We need a fix very quickly because our Servers becomes productive soon!