Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Ilo2 not responding

M.S
Advisor

Ilo2 not responding

Hi All,

We have a DL360 G6 server, i'm no more able to access the ILO2. When startying the server we will get the following message:
Waring ILO2 not responding

Cheking /var/log/messages we noticed the below messages:

hpilo 0000:01:04.2: Closing, but controller still active
hpilo 0000:01:04.2: Open could not dequeue a packet


Your response is highly appreciated.

Thanks
1 REPLY
Honored Contributor

Re: Ilo2 not responding

If you reboot the server, do you see the iLO option ROM prompt? You might want to shut down and A/C power cycle in order to reset iLO. Then check to see that you are running current iLO 2 firmware.

http://www.hp.com/support/ilo2