Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

LO100 retrieving power status over CLP/telnet/ssh

Occasional Visitor

LO100 retrieving power status over CLP/telnet/ssh

Hello,

I'm trying to retrieve the power status of ML115G5/LO100 boxes via the CLP using telnet or ssh, without success so far!

I'm able to successfully power up and power down the device via the CLP using comamnds 'start /system1' and 'stop /system1' etc.

However, for the system1 property 'enabledstate' is always set to 'enabled', regardless if the system is powered up or down.

My expectation from reading ILO materials is that the property 'enabledstate' should be set to 'disabled' if the machine is powered up.

Any suggestions?