Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple keystrokes in iLO2 Remote Console

SOLVED
Go to solution
Michael Stephenson
Occasional Visitor

Multiple keystrokes in iLO2 Remote Console

Hi All,

Whenever I try and connect to our Proliant through the iLO2 Remote Console, I am unable to type anything without nearly all of my keystrokes being duplicated multiple times.

For example, if I boot the system and try and edit the 'Kernel' line in GRUB, if I press 'e' to edit the line, I am automatically entered into edit mode (at the wrong line) with about 20 e's at the end of the line.
This also means that I am unable to type the root password to enter maintenance mode...!?

Has anyone else seen this before? If so, is there anything I can do to stop it from happening?

It is highly annoying and often results in me wasting hours of time trying to type passwords or delete extra keystrokes when editing.

Many thanks in advance,
Mike
1 REPLY
Gerardo Arceri
Trusted Contributor
Solution

Re: Multiple keystrokes in iLO2 Remote Console

Mike,
This should fix that annoying problem:

Make sure the ILO Remote Console is NOT open.
Open up the ILO Web Interface, go to Remote Console / Settings, make sure Key Up/Key Down is DISABLED.
Open RC and enjoy.
Let me know if it doesn't