Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

SOLVED
Go to Solution
Super Advisor

Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

[ Edited ]

Hi folks, I just want to have a firm answer to this.

 

Recently we have used a Gbic module to connect our Cisco switch in hope to get a better performance. But it seems like if we power off the server, we lose the LO100 connection. Is that because LO100 shared port only supports 100Mps LAN and won't be detected by Gbic? It is a remote server, so I can't really get my hands on it for some simply test. 

 

Thank you in advance.

1 REPLY
Super Advisor

Re: Problem on LO100 (shared port of a DL180 G6) connecting to a Cisco switch via Gbic module

I have tested it. The LO100i port only supports 10mbps.

//Add this to "OnDomLoad" event