Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Problems to login int to the ILO 100

Occasional Visitor

Problems to login int to the ILO 100

Hello!
Some days ago i got my HP DL140G3 back from RMA, now i can't login in to the ilo.
i tried standard admin/admin, Operator/Operator, tried my old admin/mypass, also admin with blank password, nothing is working. as i noticed, they changed mainboard, now i have board with newer bios (dated with august 2007) and newer ilo firmware, dont remember version. In this version now is presented Virtual KVM.
Any ideas about password? And yes, i tried to reset bios, nothing :)
3 REPLIES
Honored Contributor

Re: Problems to login int to the ILO 100

hi

someone had a similar issue days ago.

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1190011

download firmware according with your server

regards
Didn't your momma teach you to say thanks!
Occasional Visitor

Re: Problems to login int to the ILO 100

Hi!
Downgraded to version 2.0, no i can't upgrade back to 2.12 :(
!=0.ror1 INTEL CHIPSET NOT SUPPORTED. Response[24h,00h,C1h,00h,00h,00h]. Cell[2] Error43, FlashWhichMachine() failed.
Honored Contributor

Re: Problems to login int to the ILO 100

hi

so go one by one, I mean 2.0 now update to 2.10, 2.11, 2.12 and 2.13 that is the latest one by the way

regards
Didn't your momma teach you to say thanks!