Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

RILO II Virtual Media on DL 380 G3

SOLVED
Go to Solution
Occasional Visitor

RILO II Virtual Media on DL 380 G3

I have a DL 380 G3 with Rilo II installed. I can do everything except virtual media. Whenever I try to use virtual CD or Floppy the target server shows "USB device not recognized." ANy ideas?
2 REPLIES
Trusted Contributor

Re: RILO II Virtual Media on DL 380 G3

Scott,
depending on which DL380 you have, Virtual Media was not supported on units w/o the 533 front side bus...or better yet 2.4-2.8Ghz boxes. The 3.06 and higher do have support for Virtual Media. Please see the slot support matrix for more information.

http://h18013.www1.hp.com/products/servers/management/riloe2/server-slot-matrix.html
Respected Contributor

Re: RILO II Virtual Media on DL 380 G3

Scott,
Did you ever get this resolved?
If not...check to make sure your 30-pin grey ribbon cable is properly connected. This gives you auxiliary power, keyboard, mouse and virtual media (usb) capability. Your 380 G3 supports all the above. Also check to make sure you have the Riloe II device driver installed.
Ed
//Add this to "OnDomLoad" event