Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

RILOE Directory Support cannot create HP Role

SOLVED
Go to Solution
Occasional Contributor

RILOE Directory Support cannot create HP Role

OS: Windows Server 2003
Operator: Administrator


I have a hard time to create a "HP Role" as mentioned in "Integrating HP ProLiant Lights-Out processors with Microsoft Active Directory" document.

Everything was smoothly until creating HP Role. In page 8, it says "Using the AD Users and Computers MMC snap-in, create an Organization Unit (as shown in Figure 10) and two new HP Roles objects within this unit."

In the AD MMC, I tried to right-click, and it has computer, contact, group, user, ...etc, but no HP Role can be found. Is there anyone can give me a clue? Thanks.
2 REPLIES
Honored Contributor

Re: RILOE Directory Support cannot create HP Role

It your MMC console an English installation? The snap-in is English only and also only appears when MMC is in English.

Language compatibility issues with the snap-in are discussed in this thread:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=675003

Some workarounds in that case are described here:
>>I put an English Windows 2000 Server in the German Server Domain
>>with the HP Schema Extender. Then I installed the HP Snap-In
>>Installer on this Server and it works.
>>Now I'm sure that the Schema Extender works, but the Snap-In
>>Installer does not work with the German operating system.

And here:
>>the same operation worked from another server which happened
>>to be a domain controller

If you solve this issue, please let us know.
Occasional Contributor

Re: RILOE Directory Support cannot create HP Role

Thank you so much, it does solve my problem. It works perfectly when I used an English version OS to run the installation of HP Directory tools.