Server Management - Remote Server Management
1748103 Members
4714 Online
108758 Solutions
New Discussion юеВ

Re: RILOE II REMOTE CONSOLE Issue

 
afeno
New Member

RILOE II REMOTE CONSOLE Issue

I was tring to find a solution to my problem on different Post and I always found the same solution: To disable to proxy.

Like many other users, I'm having problems with the RILOE II Remote Console:

When I start a remote console session
I get a black screen with the following lines
Login Name: -----Long sequence of characters
Password: *********************
Invalid login.
Login Name : SESSION MAIN ..

In all forums, the recommendation is to disable to proxy. Example: http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=771478

In my particular case, If I disable the proxy usage in the browser, then the https RILO interface won't be reachable.

This is my setup:
- My RILO is outside the intranet.
- The port 23 is reachable from my current lan.
- The port 443 and 80 are reachable from my lan through a proxy.

If I disable the proxy, then I can not connect to the RILO through web anymore.

How can I solve this issue?

Thanks in advance,
Regards.
Alfredo Fenoglio
5 REPLIES 5
RaMpaNTe
Trusted Contributor

Re: RILOE II REMOTE CONSOLE Issue

Hello, for RILOE II you need also port 17899 to be opened. So here is the list of ports that you need to have open in your firewall, switches and proxy in case you are using one:

80 (HTTP) and 443 (SSL)
23 (Telnet)
17899 and 2381 & 2301

Thanks,
RaMpaNTe
You heve a question... I have an aswer!!!
afeno
New Member

Re: RILOE II REMOTE CONSOLE Issue

Hello RaMpaNTe.

Thanks for your suggestion.
The problem that I have is that part of the ports are going through a proxy (port 80 & 443) and some other ports are direct (23 and others)

If I set Java to use the same LAN setup than the browser, then the port 23 is not reachable by Java (I think so..)
If I disable the proxy, then I can not connect to the port 80 / 443 any more.

May be I can set all the ports different than 80/443 on the RILO and then go try to connect without using the proxy...

Regards,
Alfredo.

pd: Esta RILO me esta volviendo loco... ;)
RaMpaNTe
Trusted Contributor

Re: RILOE II REMOTE CONSOLE Issue

Claro, las RILOEs suelen ser un dolor de cabeza.

One important thing... What server and in which PCI slot is the RILOE plugged in?

There are some slots in certain servers in which the RILOE might not work properly so you may want to take a look at this:

http://h18013.www1.hp.com/products/servers/management/riloe2/server-slot-matrix.html
You heve a question... I have an aswer!!!
afeno
New Member

Re: RILOE II REMOTE CONSOLE Issue

Hi,
The RILO is working perfectly if I access it from the same LAN. It is not a compatibility issue.
The problem is when I try to use the remote console going through a proxy.

Regards,
Alfredo.
RaMpaNTe
Trusted Contributor

Re: RILOE II REMOTE CONSOLE Issue

Humm... well we have used both ways and as long as the ports are opened we have had no issues using both ways.

Now, in the proxy you are using... are there any restrictions for certain web addresses??? you may want to add the RILOEs IP and DNS to the proxy a a safe/allowed website.
You heve a question... I have an aswer!!!