Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
Showing results for 
Search instead for 
Did you mean: 

RILOE II not working with HP RDC Pass-Through Service

Walter Sexauer
Occasional Contributor

RILOE II not working with HP RDC Pass-Through Service

I have a HP ML370 G4 Single Processor Server that has Integrated LOE Installed (iLOE).

I have installed a Remote Insight Lights-Out Edition II PCI card in the server and it automatically disabled the iLOE as expected.

The Remote Insight LOE II Firmware Version is: 1.20 (latest)

The server is running Windows Server 2003 Standard Edition SP1

The RILOE II card works great and I can control the server with a Remote Console session but I would like to use a Remote Desktop Connection through the RILOE II.

I have installed the Hp Pass-Through Service v1.0.23 but each time I try to start the service I get the following error in the event log:

Event Type: Error
Event Source: hplopts
Event Category: None
Event ID: 4
Date: 4/14/2006
Time: 6:25:39 PM
User: N/A
Computer: SERV2
Exception in Passthrough thread.

System.Exception: The management processor returned

an error (4294967295) when attempting to signal to iLO that server is ready.
at hplopts.Passthru.SignalServerReady()
at hplopts.Passthru.PassthruThread()

For more information, see Help and Support Center at

I can use Remote Desktop connections to the server from other workstations on the same network as the server via the server NIC and they work fine.

I have the dependency set that causes the Pass-Through service to start after the RDC service.

I would like some help in resolving this issue. Thank You.
Valued Contributor

Re: RILOE II not working with HP RDC Pass-Through Service

RILOE-II Terminal Services functionality requires a Updated HP Terminal Services Passthrough Software.
The Passthrough software is under Release
process and will be released to web soon.