Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

RILOE Power Cord

SOLVED
Go to Solution
Occasional Contributor

RILOE Power Cord

Judging by this link http://h18013.www1.hp.com/products/servers/management/remote-lightsout/server-slot-matrix.html it is recommended that the power cable for the RILOE be connected when the card is in a DL580 G1. I thought that this card was only used in case the server was unplugged from power. If the server is plugged in (whether turned on or not) the RILOE receives power from the PCI bus and is accessible. Am I correct in this or is the cable required to access the server when it is turned off?
2 REPLIES
Regular Advisor

Re: RILOE Power Cord

I beleive it needs it.. when the server is off the PCI slot is off also.
Trusted Contributor

Re: RILOE Power Cord

Actually if you power off the server but do not remove the physical power cord, RILOE (II) will function if the external power cable is used or if the internal 16/30 pin cables are used.
//Add this to "OnDomLoad" event