Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

RX6600 and SNMP destination for ILO2

Occasional Contributor

RX6600 and SNMP destination for ILO2

How can I set the SNMP destination on these ILO's? The SNMP setting screen on the WEB ui only has the option to enable/disable and set the community string.
The command line option on P.72 of http://docs.hp.com/en/AB419-9006A/AB419-9006A.pdf also fails as the command to set the destination fails as there does not appear to be the options listed.

Any help appreciated.
2 REPLIES
Honored Contributor

Re: RX6600 and SNMP destination for ILO2

SNMP trap destinations are not yet supported by iLO for Integrity.
Occasional Contributor

Re: RX6600 and SNMP destination for ILO2

Thanks for the reply. Any idea on when it will be supported?