Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Reset PIN layout on ILO PCI card

SOLVED
Go to Solution
Occasional Contributor

Reset PIN layout on ILO PCI card

Hi all

I have ILO card p/n 158731-001 (RILO I ?) that I'm about to put into a non-HP/non-Compaq box. It works just fine with external keyboard loopback. The only missing piece is the ability to cold reset the machine. Obviously I can't plug the virtual power button cable anywhere into my box and have to use the two pins that are normally used with case front panel reset button.

On the ILO card there is a number of standalone pins and I bet some of them are for reset. Unfortunately I don't have any documentation and couldn't find the pin layout on hp.com site either.

Could anyone help? Which pins can I use for reseting my machine?

Thanks!
1 REPLY
Occasional Visitor

Re: Reset PIN layout on ILO PCI card

Just had the same problem and solved it!

Have a look here:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1071744


Best regards,
Christian