Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

Resetting RILOE II via System Mgmt

Robert Berrie_2
Occasional Contributor

Resetting RILOE II via System Mgmt

When I login to the Sys Mgmt page (https://servername:2381) and attempt to reset the RILOE II card, I receive the following error:
"HP Web Agent HTTP Post Error
An error occurred attempting a SNMP set request.
Invalid type of post request or parameters missing. "

The RILOE II lost communication with HPONCFG after setting the network parameters and I am attempting to re-establish communication with the card without rebooting.

Using:
HTTP Server v5.94.0
1 REPLY
David Claypool
Honored Contributor

Re: Resetting RILOE II via System Mgmt

Make sure you have SNMP sets enabled in the Insight agent applet in Control Panel and that you have established a write community string in the SNMP service.