Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Showing results for 
Search instead for 
Did you mean: 

Restore iLO - CMD Line

Michael Rachul
Occasional Advisor

Restore iLO - CMD Line

We just started building blades with Server 2008 R2 and when we configure the iLO we use the command line:

C:\Program Files\HP\hpconfg.exe /f c:\temp\bl460g6.xml.

We get the following error:
Status = 0x1
Message = Syntax error: Line #2: syntax error near "?" in the line "?xml version="1.0" encoding="ISO-8859-1"?">"

The xml file works fine in a Server 2003 build but not in Server 2008 R2.

Any ideas?
Honored Contributor

Re: Restore iLO - CMD Line


Looks like your missing a "<" in the begining of the line but then it would sound very weird that it's working in 2003.

The only thing i can think of is if the version of hponcfg you are using is not supported with 2008 R2. Try using a newer version.

Or that 2008 R2 has some issue with XML version 1.0. See if HP has released some new example scripts.