Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II)
cancel
Showing results for 
Search instead for 
Did you mean: 

RiLOE II. Mouse Disconnected Interall after accessing remote console

Lloyd Duffield
Occasional Advisor

RiLOE II. Mouse Disconnected Interall after accessing remote console

HI, I have installed 4 Riloe 2 card in 4 ML350 servers, thurday and friday they where working fine. Just come to log on the server via the Cards, and as soon as you connect via the GUI, the mouse status becomes "Disconnected", and i am unable to perform a "Ctrl Alt Del" This happens on all the servers has anyone come across this at all?

Firmware on the Riloe is 1.14
2 REPLIES
acartes
Honored Contributor

Re: RiLOE II. Mouse Disconnected Interall after accessing remote console

Do you have the 30-pin RILOE II internal ribbon cable attached?
acartes
Honored Contributor

Re: RiLOE II. Mouse Disconnected Interall after accessing remote console

The local keyboard and mouse are "disconnected" while a remote console session is underway. This is because the keyboard and mouse PS2 controllers cannot be shared between a remote and local user.

You might want to try USB devices locally if this is an issue.