Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

Smash CLP configuration of SSO Certificate

Frequent Advisor

Smash CLP configuration of SSO Certificate

Hi,

I am trying to configure a DL 380 G7 through SSH access to trust my HP SIM server with a Certificate. The ILO Scripting manual for v3 fw 1.20 states that

To dynamically import a certificate from the specified server (hpsim2.corp.net):
hpiLO-> load = hpsim2.corp.net


However, with my experiment and looking at the LOAD command help output it is quite clear that this command can only be used to Download a new Firmware .bin file over HTTP/HTTPS protocol.

I am ofcourse in the correct target (/map1/oemhp_ssocfg1/) when trying it out.
Is there an error in the manuals or am I using it incorrectly?

Any tips are welcome,
Antti
3 REPLIES
Honored Contributor

Re: Smash CLP configuration of SSO Certificate

It doesn't seem to work. Can you use the webGUI to set the the SSO and import the certificate instead?



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Frequent Advisor

Re: Smash CLP configuration of SSO Certificate

Hi,

yes the web gui is working as expected but is not how I want to configure multiple machines. Any other mass deployment methods would also be welcome?
Honored Contributor

Re: Smash CLP configuration of SSO Certificate