Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

VSP doesn't work anymore after upgrading to 1.79

Occasional Visitor

VSP doesn't work anymore after upgrading to 1.79

Hi,
I just upgraded two DL360G5 to iLO v1.79 (one Red Hat 4 x86, one Red Hat 5 x86_64) and I can't use vsp anymore.

Here is what I got:
hpiLO-> vsp

Starting virtual serial port.
Press 'ESC (' to return to the CLI Session.

hpiLO-> Virtual Serial Port active: IO=0x02F8 INT=3

The console hangs on the last line, and I can't get to the login prompt anymore... useless to say, it worked perfectly with iLO 1.50 and older.
Any idea? Thanks in advance.
1 REPLY
Honored Contributor

Re: VSP doesn't work anymore after upgrading to 1.79

Some fundamentals...

Check to make sure that the host is on.

Check the OS to make sure that there is a tty/getty bound to com1 (the I/O resources you list).

Did you use host RBSU to alter the serial port and/or EMS configuration?