What TCP/IP ports does iLO 3 use?

[djk]

I need to request remote access through my corporate firewall to the ILO 3 port on my Proliant DL380 G7 servers.

I need to provide the IP address and the TCP port numbers used by ILO 3.

QUESTION - What TCP/IP ports does iLO 3 use?

[Daniel Bowers · Accepted solution]

You can look up what ports are used via the iLO 3 web interface. Expand the "Administration" menu on the left, then click on the "Access Settings" link. That screen will tell you the ports used by the various services.

Here are the defaults:
SSH 22
Web (non-SSL) 80
SSL 443
IPMI-over-LAN 623
Remote Console 17990
Virtual Media 17988

You might also need to enable other ports if you're using DHCP, DNS, SNTP, SNMP, and/or LDAP from iLO.

[djk]

Question answered.