cannot install ilo online configuration utilitiy gui for ml150 g6

[gdrummer]

Before I start, this server is on a remote site in which I will never physically touch.  i.e.  cannot reboot and go in iLO boot options to change IPs...

I cannot find the right driver to install the ilo management on - http://h20566.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=3884326&swLangOid=8&swEnvOid=4064

I have tried the normal driver I use for 2008 r2 64x, but no dice.  http://h20564.www2.hpe.com/hpsc/swd/public/detail?swItemId=MTX_7ce673c901e841599eb31e3372#tab3

SMH shows Lights Out 100 w/an IP configured when this server went in initially,  but I need to change the IP as it's a different scheme...

Any ideas?

[Jimmy Vance]

Lights-out 100 (LO100) is not the same BMC as iLO. iLO tools will not work on LO100

[gdrummer]

 Hi Jimmy,

Thanks.  So the only way to configure this is in the menu before the system POSTs?

I'm still sorta new to iLO configuration.  What do you mean by BMC?  Do you have any articles on what you are saying or how to know if it will/won't work?  I never knew this...  

[Jimmy Vance]

BMC = Baseband Management Controller.  Some of the older entry level servers had LO100 for management, it is not the same as iLO.

[gdrummer]

Oh, gotcha.  Thanks for the info.