Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

SOLVED
Go to Solution
Occasional Contributor

configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

Hello,

I am in the process of installing ESXi on three blades in my c7000 and after OS installation I have run into a dead end.

To change ip address on the servers I have to navigate up/down in the menu by using arrow keys. However - they don't work and I cannot find them in the hotkey mapping table either.

What am I missing?

Have tried both in iLO2 fw ver 1.82 and 2.00 without luck. Have also tried both with Norwegian and US keyboard mapping on my laptop.
4 REPLIES
Occasional Contributor

Re: configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

Update: Works with the Java-version, but not in the IRC.

I can live with this getaround, but it would be interesting to hear if anyone else have had the same experience.
HPE Pro

Re: configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

What OS and browser version are you running on your laptop to access IRC?



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Contributor

Re: configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

Hello, I am running Win7 ENT x64 with IE8.
HPE Pro

Re: configuring ESXi with iLO 2 on bl490c - up/down arrow don't work

Figured as much, I'm seeing similiar issues with Windows 7 and IE8.

Running IE8 under Vista I didn't see the problems.

Maybe not the best answer, but I've found that if I turn off "protected mode" in IE8 the cursor and function keys work as expected.

This article shows how
http://www.sevenforums.com/tutorials/63141-internet-explorer-protected-mode-turn-off.html

Keep in mind with protectd mode turned off some IE security features are disabled




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
//Add this to "OnDomLoad" event