iLO SNMP Trap on server reset

[Didier Troyon]

Hello,

We have some iLO with the firmware 1.82 and the advanced pack.
We receive the SNMP trap when we remove a power supply, disconnect a network cable and so on.
But we don't receive the alerts when we have a server reset.
RILOE 2 and RILOE are doing it?

Any idea where to have a look?

Regards,
Didier Troyon

[M.S.Srivatsa]

Questions
1.What is the Proliant server model ?
Is it DL360 or DL380 or a Blade server ?

At the sametime i would suggest you upgrade to iLO v1.84 as it has couple of bug fixes.
Please download the iLO v1.84 image from the
following web site

http://h18004.www1.hp.com/support/files/lights-out/us/download/24731.html

[Didier Troyon]

Hello,

It's a Proliant DL 380 G4
I have try to upgrade to 1.84, but no change at all.

Regards,
Didier Troyon

[M.S.Srivatsa]

This problem is already under investigation
as almost the same problem is reported from some other customer.Will update you more on this in next couple of days.

[Didier Troyon]

Hello,

The trap is send by the iLO when we do a "Reset system" in the Virtual Power of the iLO.

Regards,
Didier Troyon