Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

iLO System Information

SOLVED
Go to solution
usman mangla
Occasional Contributor

iLO System Information

When does a blade iLO gather System Information and is there a way to have it re-scan this information?

I upgraded a blade from 2x2GB to 4x2GB. After reinserting the blade, iLO reported 4 x 2GB DIMMs. However after removing 2 of the DIMMs, iLO is still reporting 4 x 2GB DIMMs.

Thanks, Usman
2 REPLIES
KarloChacon
Honored Contributor
Solution

Re: iLO System Information

hi

have you tried updating ilo Firmware and in case is the latest already try re-flashing it

bye
Didn't your momma teach you to say thanks!
acartes
Honored Contributor

Re: iLO System Information

iLO samples the host data during POST when the iLO option ROM runs.

First, check that your iLO is running current firmware (because there was a related bug fixed in iLO 2 v1.60) and then reboot the host to repopulate the data.