Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

iLO doesn't find enclosure

SOLVED
Go to Solution
Occasional Advisor

iLO doesn't find enclosure

Everything was working fine, but suddenly some iLOs (of p-Class servers) tell me: "Server is not in a managed enclosure". And in SIM Identify System task I get the message: "The discovered blade is not in an enclosure".

The strange thing: some of the servers in the same enclosure have no problem, all management agents (incl. Rack Infrastructure Service) are running.

Any ideas?
2 REPLIES
Honored Contributor

Re: iLO doesn't find enclosure

What iLO2 firmware version do you have?

p-Class is no longer supported in iLO2 versions 2.xx. If you flashed them with 2.xx, you will have to go back to iLO2 1.82




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Occasional Advisor

Re: iLO doesn't find enclosure

Going back to 1.82 solved the issue.

I checked the Release Notes (or better Component Details in VCRM - probably the same) and didn't find anything about this problem, only a list of enhancements and fixes.

Thank you.