Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

iLO2 firmware version 1.50 has been released.

Honored Contributor

iLO2 firmware version 1.50 has been released.

Link for Windows Online Flash Component:
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p308280587/v45691/

Link for Linux Online Flash Component: ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p308280586/v45689/

-------------
Enhancements:

- Adds Shared Network Port switching support of the network port options card on the HP ProLiant ML310 G5.
- Enhances Virtual Serial Port support to automatically enable and disable software flow control. By default, this behavior is disabled. This behavior can be enabled via user configuration (via RIBCL only).
- Enhances the Integrated Remote Console Media dropdown menu such that the available drives are updated in real time.

Fixes:

- Addresses certain issues involving poor virtual media performance.
- Addresses issue involving iLO 2 firmware upgrade failures on certain servers.
- Corrects a problem in reconnecting via the Virtual Serial Port after the first session is terminated.
- Resolves an issue with Virtual Media installations of Linux on certain servers.
- Addresses an issue where the iLO 2 web server stops responding after using the Remote Console Acquire button.
- Reduces the time required to mount a USB key larger than 4 GB.
- Resolves an issue with the appearance of the Remote Console button and options after a minimum resize of the remote console window.
- Corrects a problem where iLO 2 loses its IP address under certain circumstances.
- Resolves an issue in launching the Virtual Media applet from with the Blade System Configuration Wizard.
- Resolves an issue in using the CLP to change the 'oemhp_powerreg' property.
- Adds Shared Network Port status to the CLP.
- Fixes the 'Last Used Remote Console' status to reflect accurate status.
- Resolves a problem in RIBCL where a Network port change fails to complete if the XML file contains only one port to change.
- Resolves some problems in mounting a Virtual Media image via the Virtual Media Applet.
- Corrects a problem where attempting to write to Virtual Media throws a VC++ runtime error.



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
2 REPLIES
Honored Contributor

Re: iLO2 firmware version 1.50 has been released.

Do you know why Windows Online Flash Component iLO 1.50 still don't listed as available for Blades servers ?
Honored Contributor

Re: iLO2 firmware version 1.50 has been released.

There is apparently a problem with the HP website and it is being worked.
//Add this to "OnDomLoad" event