Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

iLO2 firmware version 2.13 released

Honored Contributor

iLO2 firmware version 2.13 released

[ Edited ]

If you already have iLO2 firmware version 2.12, upgrade to this version "only" if you are using (or planning to use in the future) a feature introduced in iLO2 v2.09 called "Enhanced CLI Prompt".

 

iLO2 firmware v2.13 (Aug 2012)

 

Fixes:
 iLO 2 could stop responding if the server name is greater than 10 characters and Enhanced CLI Prompt is enabled.

 

Online ROM Flash Component for Windows 32bit
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p1443420321/v80500

 

Online ROM Flash Component for Windows 64bit
ftp://ftp.hp.com/pub/softlib2/software1/sc-windows-fw-ilo/p2023401934/v80501

 

Online ROM Flash Component for Linux

ftp://ftp.hp.com/pub/softlib2/software1/sc-linux-fw-ilo/p1285463034/v80498

 

 




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
6 REPLIES
Honored Contributor

Re: iLO2 firmware version 2.13 released

Thanks for the continued development of iLO2.

 

Will there be a "Enhanced CLI Prompt" feature for iLO3?

---------------------------------------------------------------------------------
Navigation: Forum Site Map // ye olde ITRC Tree
@HP: please get rid of the Passport login timeout
Regular Advisor

Re: iLO2 firmware version 2.13 released

1) Near as I can tell, "Enhanced CLI Prompt" means the system name is in the iLO CLI prompt?

 

2) The FTP link you provided does get me iLO 2 2.13, but even now it doesn't seem to be on HP's web site.  I didn't receive an alert for it being available, and the latest I can find on any of the myriad download pages is 2.12 -- some only go to 2.09!  I've never understood this -- software shows up on the FTP server under a non-deducible path, and only months later is it findable via other means.

 

 

Honored Contributor

Re: iLO2 firmware version 2.13 released

The team decided not to release it on the web since it was only one fix to one feature that was recently introduced anyway.

 

Next month, we will be releasing a new version on the web that includes this fix plus few others.




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Regular Advisor

Re: iLO2 firmware version 2.13 released

Okay, thanks.  Command editing maybe?  Or moving the default route into map1/enetport1/lanendpt1/ipendpt1 where the IP address and netmask already are?  Or not having to wait for an iLO reset after changing each value? Ability to see the iLo dedicated ethernet speed/duplex/link status?

 

I've had a number of frustrating interactions with the CSO over iLO CLI bugs so I'm >acutely< interested in its future.  It seems that most system vendors these days expect one to set up a server using a legacy monitor and keyboard, including IBM and Dell and amazingly even Cisco.  For those of us deploying and managing remote systems, a CLI that works out of the box is vital.

 

 

Honored Contributor

Re: iLO2 firmware version 2.13 released

[ Edited ]

I know the CLI in iLO2 could be fustrating but, iLO2 is a 7+ years old product that is about to reach the End-of-Life stage. We would like to keep improving its features but, due to space constraints (ROM and RAM) we only plan to continue fixing serious problems like, iLO2 stops responding issues or security vulnerabilites that might be discovered in the future.




__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
Regular Advisor

Re: iLO2 firmware version 2.13 released

Understood, sorry if my comments above were taken wrt iLO 2 -- I was thinking of iLO in general, though I do have 3x DL380 G6 systems to contend with.