cancel
Showing results for 
Search instead for 
Did you mean: 

ilo configuration

application support
Occasional Visitor

ilo configuration

how to configure ilo for ProLiant BL20p G3 server without reboot.The server is located in remote location.

Server ip is 210.214.x.x
gateway : 210.214.4.95
subnet mask: 255.255.255.192

i need to configure ilo ip as 119.227.x.x

thnx in advance
appsupp
1 REPLY
David Claypool
Honored Contributor

Re: ilo configuration

Assuming the host OS has the iLO driver installed (part of the ProLiant Support Pack), and you can connect to a host session (like Terminal Services) on the host, you can use the HPONCFG utility to effect the change.

See http://www.hp.com/go/ilo --> Documentation --> "HP Integrated Lights-Out Management Processor Scripting and Command Line Resource Guide for HP Integrated Lights-Out versions 1.82 and 1.91 and HP Integrated Lights-Out 2 versions 1.1x, 1.2x, 1.3x, 1.70, 1.75, and 1.77" for information on how to do this. Also, http://www.hp.com/go/ilo --> Sample Scripts for downloadable examples including changing iLO network settings. The iLO will actually reboot at the completion of the configuration change, but the host will remain unfazed.