ilo monitored server console is in an unsupported text mode

[Franck_21]

The title says it all.

Host: ProLiant BL25p G1

Product Version: iLO Advanced
iLO Firmware Version: 1.92
04/24/2008

Activation Key Status
Advanced features are enabled automatically with this product.

iLO Advanced License is included

And btw we have the latest JVM.

Thanks for any help

[pratap m keshava]

What is the OS present on the server?

Are you getting the message when server boots or when OS is loaded?

Are you able to access console of any other server from the same client?

Have you tried accessing the server console from another client having different JVM?

[Franck_21]

See answers below:

What is the OS present on the server?
None currently installed

Are you getting the message when server boots or when OS is loaded?
When server boots

Are you able to access console of any other server from the same client?
Yes

Have you tried accessing the server console from another client having different JVM? Yes

Thsnks

[pratap m keshava]

There is one more thread (given below) which is related to this problem. Do check that to isolate the problem. Hope it helps!

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1245640460275+28353475&threadId=1172172

[Franck_21]

Thanks for pointing me to the post. I had seen it but it has failed to provide me with any clue and btw I do not have the special HP cable to connect a monitor

[Franck_21]

We ended up physically resetting the ILO and it worked!

[M_ER]

hi,

what do you mean resetting ilo physically?

Pulling out server ,resetting management module....

Regards.

[Franck_21]

We opened the blade and changed the switch positions at the back (from my recollection there are 6 switches and the positions are explained on a chart that is inside the blade cover)