Remote Lights-Out Mgmt (iLO 2, iLO, RILOE II) Forum
Showing results for 
Search instead for 
Do you mean 

unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

SOLVED
Go to Solution
Occasional Visitor

unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

I have been unable to change the SERIAL_CLI_SPEED via hponcfg on a DL380G7 via hponcfg.

My Mod_Global.xml file:











When I run hponcfg -f Mod_Global.xml I get a "Script Successful" message.

Then using the following xml:








I get the following:
Firmware Revision = 1.16 Device type = iLO 3 Driver name = hpilo


















Script succeeded

I have applied the Proliant Support Pack 8.60 to this machine as well.
3 REPLIES
HPE Pro

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

What version of hponcfg are you using?



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Occasional Visitor

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

Currently using hponcfg version 3.1.0
Honored Contributor

Re: unable to change SERIAL_CLI_SPEED via hponcfg on DL380G7

This is a known iLO3 firmware issue that has been fixed in the new firmware version 1.20.
1.20 should hit the web by the end of this month.



__________________________________________________
I work for Hewlett Packard

If you feel this was helpful please click the KUDOS! thumb below!
//Add this to "OnDomLoad" event