HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Secure OS Software for Linux
cancel
Showing results for 
Search instead for 
Did you mean: 

SuSE 8.0 + ProLiant DL320 G2 ATA RAID

 
Jordi_20
Occasional Visitor

SuSE 8.0 + ProLiant DL320 G2 ATA RAID

Hi,
Is possible install SuSE 8.0 Pro in a ProLiant DL320 G2 with ATA RAID ?
2 REPLIES
xyko_1
Esteemed Contributor

Re: SuSE 8.0 + ProLiant DL320 G2 ATA RAID

Hi Jordi,

you have to know what is your ata raid controller and see if it's supported on linux. If it's supported then you have to know if suse 8 has the module (driver) to the controller. If it does not has then you will have to generate a floppy disk with the module and inform it during the installation process.

regards,
xyko
HGN
Honored Contributor

Re: SuSE 8.0 + ProLiant DL320 G2 ATA RAID

Hi

What is required to install the Linux OS is that the driver disk (after confirming that there exists a driver for this version of linux). Once you find the driver the same should have instructions to create the floppy.

Rgds

HGN