canot install Linux EL 4 on rx2620 (AD152A)

[Homsan]

hi all...
i have some trouble with my server .. i cannot install Linux RHEL 4 on rx2620, the installation is frezee on loading initrd.img .
but if i install rhas 2.1 thereis no error.

How i can continue installation with RHEL4 ..??

[Stuart Browne]

You're definately using RHEL4 ES (or AS) for ia64?

Which update?

What are the last few lines before the freeze?

[Homsan]

yes , i really want to install rhel 4 for ia64.
i use update 4 for rhel4 .
in my screen is look like this:
ELILO Boot: uncompressing linux ....Done
Loading file initrd.img....Done

after that ... the server is no process .
if i press alt+f3 the screen look :
....
INFO : trying to mount cd device hda
INFO : mntloop loop0 on /mnt/runtime as /mnt/source/images/stage2.img fd is 10
INFO : support = 0

if press alt+f4 look like :
......
<7> ISO 9660 Extension : RRIP_I991A
<4> Unable to identify cd-room format
<4> VFS: can't fine an ext2 filesystem on dev loop0

[Stuart Browne]

Hrm.. It sounds like a bad-burn to the media.

I'd say run a 'mediacheck' on it, but you're not getting far enough :)

The ISO was downloaded, right? If so, download it again, make sure the MD5 hash matches up, and re-burn.

Failing that, try U5?

[Homsan]

hi ,
i dont thing so ... cause i can install this cd in rx2600 ( ia64 itanium) untl finish.
i try install rhel 5 on this machine , and i got same trouble like rhel 4 .

do u have another idea how to check it ?

[Rob Leadbeater]

Sounds like it could be a bad CD-ROM drive on the server...

Hope this helps,

Regards,

Rob

[Steven E. Protter]

Shalom,

Well if the hardware was broke RH 2.1 would not work either.

Stuart is probably right about bad media.

ANother possible gotchya is firmware. The system firmware may require update prior to RHEL 4 installation.

SEP

[Stuart Browne]

Looks like SEP & Firmware.

- RHAS 2.1 works on this hardware
- This media works on another (same model) server

So check the storage controller firmware, as well as BIOS etc. firmware. If you can, also compare settings..

(NOTE: I've not used one, so I can't tell you were to look exactally).

[Oliver Wriedt · Accepted solution]

Hi

Could you give it a try with:

ELILO boot: linux console=ttyS0

Maybe it is a problem with the display.

Regards
Oliver

[Bill Snow_2]

We've seen what seems to be the same thing on rx2660. The RH download distro works just fine, but the HP-provided DVDs give the error you describe to open this thread. Does anyone have any insight?