Security
cancel
Showing results for 
Search instead for 
Did you mean: 

Adding a new library in the SIA configuration for tru64 v 5.1B

Stefano_36
Frequent Advisor

Adding a new library in the SIA configuration for tru64 v 5.1B

Hi to all,
i need to add a new library to the existing SIA configuration. I would to know how can i add to the SIA (matrix.conf file) my new library, in with order in respect to the standard libraries, which standard libraries i need to include in the Makefile. Anyone has an example to show how to do that ?
10x in advace
2 REPLIES
Ann Majeske
Honored Contributor

Re: Adding a new library in the SIA configuration for tru64 v 5.1B

Hi Sefano,

The best I could find in the Tru64 Documentation is chapter 6 in the Security Programming guide. See also the man page for siacfg.

Ann
Ann Majeske
Honored Contributor

Re: Adding a new library in the SIA configuration for tru64 v 5.1B

There's some information at the following link. Note that this information is supplied personally by Spider Boardman, it is not HP "officially supported" documentation. Many thanks to Spider for this information.

http://home.comcast.net/~spiderb/sec/