Security
cancel
Showing results for 
Search instead for 
Did you mean: 

Compile and add a custom SIA module

dompax
Occasional Advisor

Compile and add a custom SIA module

Hi,
I would write a custom SIA module for a Tru64 5.1B.

I don't know the procedure for write, compile and add a SIA module in matrix.conf. It's possibile to add in stack more SIA module in matrix.conf?

How are the directive for module compilation on Tru64?

Where I find any documentation on these questions?

Thanks in advance.
3 REPLIES
Ann Majeske
Honored Contributor
dompax
Occasional Advisor

Re: Compile and add a custom SIA module

I Ann,
thanks for reply!!!...

Can you send me any examples for write, compile and add a new custom SIA module?

The link in the post is not available and there aren't some link of this topic.

In the documentation there aren't any information how to write and compile module.
It's possible to add in stack a custom module in matrix.conf?

Thanks.


Ann Majeske
Honored Contributor

Re: Compile and add a custom SIA module

There's some information at the following link. Note that this information is supplied personally by Spider Boardman, it is not HP "officially supported" documentation. Many thanks to Spider for this information.

http://home.comcast.net/~spiderb/sec/